{()) SXV300 CONNECT TUNER & MARINE/RV ANTENNA INSTALLATION GUIDE Scan to Activate Offer
eO G) :c .... C\1 ..,n I Plan the Antenna Location and Mounting Option Caution: When installing the antenna, do not cut or alter the amenna cable, or remove the cable connectors . Two considerations are necessary before installing the antenna. First, finding a suitable mounting location, and second determining how the antenna will be mounted . There are several in-box mounting options for the antenna, or accessories can be purchased from a marine store for additional marine mounting options.
e Install the Antenna Always mount the antenna so that it does not interfere with safe operation of the vessel o r RV. Important: When mounting to a surface using the low-profile, pedestal, or extension mast mounting method where the antenna cable will exit above the mounting surface, orient the base or pedestal bottom so that the antenna cab le exit s towards the rear of the vessel or RV, away from oncoming wind from normal vessel or vehic le motion. Surface Mount 1. Dril l a 9/ 16" mounting hole.
. The provided mounting screws will accommodate most surfaces. If you find them too long, too short, or otherwise unsuitable for your application, substitute wood screws, machine screws/washers/nuts, or other hardware (not provided). Be sure to use only stainless steel hardware. If you find it too difficult to start the mounting screws, drill 3 mm (7/64") pilot holes. 5.
too short, or otherwise unsuitable for your application, substitute wood screws, machine screws/washers/nuts, or other hardware (not provided). Be sure to use only stainless steel hardware. If you find it too difficult to start the screws, drill 7/64" pilot holes. 6. Unscrew the pedestal bottom from the rest of the antenna assembly, keeping the rubber o-ring in place. 7. If you are not routing the 6" antenna lead out through the side of the pedestal bottom, continue with step 9.
e Make the Connections Connect the SXV300 Connect Tuner to the radio/ headunit, and the antenna to t he Tuner (if you have not yet done so). 1. You 'll need to access the back of the SiriusXM-Ready radio/ headunit so you can plug the Tuner connector into it. This may require you to remove the radio/ headunit from the dashboard. If you are uncomfortable with this step, consult a professi o nal insta ller. 2. Be sure to turn OFF the SiriusXM-Ready radio/ headunit before connecting the Tuner. 3.
Secure the Tuner The SXV300 Connect Tuner should be secured in a hidden location that is dry and not exposed to moisture. 1. Secure the SXV300 Connect Tuner behind the radio/ headunit location, or behind the vessel's helm. or the under the RV dashboard using wire ties (not included). 2. Thread the wire ties through the molded brackets on the underside of the Tuner as shown. Then secure it to a bracket or wiring harness using the wire ties.
Subscribe 1. Make sure the radio/headunit is turned on and that Satellite Radio is selected. Verify that you are receiving the SiriusXM signal so that you can hear the SiriusXM audio. 2. Make a note of your Radio ID. You can find it on channel 0, on a label on the bottom of the packaging, and on the label on the bottom of the SXV300 Connect Tuner. Note! The Radio ID does not use the letters I, 0, S, or F. 3. Activate your service: • First see our Customer Agreement for complete terms at www.siriusxm.
• Troubleshooting This troubleshooting information is for general reference. Consult the User Guide for your SiriusXMReady radio/headunit for specific operating instructions and advisory messages that may be d isplayed. Your radio/ headunit may display slightly different messages. No Signal (NoSignal) • Make sure that the vessel/RV is outdoors with a clear view of the southern sky. • Make sure the antenna is mounted outside of the vessel/RV. • Move your antenna away from any obstructed area.
What's in the Box? Thank you for purchasing the SXV300Ml SiriusXM Direct Connect Tuner & Marine/RV Antenna. Included is everything you need to add Satellite Radio to your SiriusXM-Ready radio/headunit. Consult your radio/ headunit User Guide for features and detailed operational instructions. For questions or support, please visit www.siriusxm.com or call 1-866-635-2349.
t4 Specifications SXV300 Connect Tuner Dimensions: Weight: Pigtail Cable Length: Power Requirements: Operating Temperature: 3.42 in (W) x 2 in (H) x 0 .7 in (D), (87 mm (W) x 51.8 m m ( H) x 17.9 mm (D)) 3 oz (85 g) 25.6 in (650 mm) 12v DC, 0 .3 A (MAX) (supplied by radio/ headunit) -4°F to +158°F (-20°C to +70°C) Marine/RV Antenna Type: Pigtail Cable: Antenna Cable: Waterproof Rating : SiriusXM approved Marine Antenna 6 in (152 mm), TNC female 25 ft (7.
0 Important Legal Information Copyrights and Trademarks © 2022 Sirius XM Radio Inc. SiriusXM, Automatic, Pandora and all related logos are trademarks of Sirius XM Radio Inc. and its respective subsidiaries. All other marks, channel names and logos are the property of their respective owners. All rights reserved. SHAKESPEARE®, used under license, is a reg istered trademark of Shakespeare Company, LLC. Subscription Offer Details A $15 Activation Fee and credit card are required for this offer.
SiriusXM 12-Month Limited Warranty What This Warranty Covers This warranty covers defects in material and workmanship for 12 months from the date of purchase by the original retail purchaser only. Sirius XM Radio Inc., at its sole option, will repair or replace the product with a new or reconditioned product without charge for parts and labor. Products replaced under this warranty become the property of SiriusXM.
