Owner's Manual

e
Make the Connections
Connect the SXV300 Connect Tuner to the radio / headunit , and the antenna to t he Tuner (if you
have not yet done so).
1. You'll need to access the back of the SiriusXM-Ready radio / headun it so you can plug
the Tuner connector into it. This may require you to remove the radio / headunit from the
dashboard. If you are uncomfortable with this step, consult a professi onal insta ll er .
2. Be sure to turn OFF the SiriusXM-Ready radio / headunit before connecting the Tuner.
3. The radio / headunit may have a pane l mount type connector or it may have a pigtail type
connector. Locate the SiriusXM connector on the radio / headunit and push-in the SXV300
Connect Tuner connector until it " clicks " into place. You may want to tug gently on the
cable to make sure it is locked into place. In some cases, you may need to pull the slide
lock * to help insert and lock in the connection.
PANEL MOUNT
TYPE CONNECTOR
* To connect or
disconnect,
pull the ,
slide lock
back
Connector
orientation
may vary
4. Connect (or verify) that the antenna cable is
connected to the SXV300 Connect Tuner.
PIGTAIL TYPE
CONNECTOR