Owner's Manual
Table Of Contents
- User Guide
- Reset
- Demo Mode
- Table of Contents
- Features
- Supplied Accessories
- Commander Touch Connections
- Install the Commander Touch Display Controller
- Install the Commander Touch Tuner Module
- Install the Magnetic Mount Antenna and Route the Antenna Cable
- Install the Wiring
- Subscribe
- Update the Commander Touch Software
- Using Commander Touch
- Settings
- Troubleshooting
- Specs
22
Commander Touch User Guide
9. The audio level can be adjusted by swiping to the Settings page, tap Audio Level, then tap
Audio Output Level and adjust the audio output level.
NOTE! The Audio Output Level adjusts both the AUX audio output level as well as the
FMDA audio output level. Use caution when making the adjustments. For FM it is
recommended to adjust the level to MAX.
10. If channel 88.1 has static or interference, other FM channels can be selected by swiping to the
Settings page, tap FM and adjust the FM channel
.
Tap a
+
button to save it as a preset. Set the
vehicle’s radio to the same FM channel.
The installation is complete and you are now ready to activate your Commander Touch. Continue
with “Step 5: Subscribe” on page 23.
Swipe left or right to Settings
page and tap FM
Change the FM Channel
Swipe left or right to Settings
page and tap Audio Level
Ta p Audio Output Level and then
adjust the audio output level
Introduction