Owner's Manual

23
Commander Touch User Guide
Step 5: Subscribe
Follow these steps to subscribe your Commander Touch. Once you have successfully activated the
Commander Touch, you will be able to tune to other channels.
1. Make sure your Commander Touch is turned on, receiving the SiriusXM signal, and tuned to
Preview Channel 1 so that you can hear the SiriusXM audio. (Refer to “Tuning Channels” on page
32 for instructions on tuning channels.)
2. Make a note of your Radio ID. You can find it
by swiping to Settings and tapping About, by
tuning to channel 0, on a label on the bottom of
the gift box, and on the label on the back of the
Commander Touch Tuner Module.
NOTE! The Radio ID does not use the letters
I, O, S, or F.
3. To subscribe: See Important Legal Information in this User Guide. Then:
~Online: Go to www.siriusxm.com/activatenow to access or set up an online account, subscribe
to the service, and activate your Commander Touch.
OR
~By phone: Call 1-866-587-4225 (If calling to activate, be sure to mention “Never Miss A Beat”).
Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may
take up to an hour. We recommend that your Commander Touch remain on until subscribed. Once
subscribed, the Commander Touch will receive, and you can tune to, the channels in your subscription
plan.
Introduction