Owner's Manual

28
Commander Touch User Guide
Using Commander Touch
Turning the Commander Touch On and Off
Press the Power button to turn the Commander Touch on. Press and hold the Power button for one
second to turn off. The display may stay on for a second or two after you press and hold for one
second; this is normal. You can also press and hold until the display turns off.
NOTE! When Commander Touch is installed with the FMDA25 FM Direct Adapter, if the
accessory power is on in the vehicle, turning Commander Touch off will switch the audio
back to the vehicle’s radio so that you can listen to AM or FM channels.
Navigation Basics
The Commander Touch uses a touchscreen to navigate and make selections. Use your finger to
make selections by tapping the icons displayed on the screen. Some icons have a double behavior,
depending upon whether you tap and release the icon, or whether you tap and hold the icon. For
example, the Traffic and Weather Now icon will play the traffic and weather report when it’s tapped
and released, or will display a list of available cities when it’s tapped and held.
The swipe area can be navigated by
dragging your finger across the swipe
area, left and right, and up and down.
You can also quickly flick your finger
to navigate between pages. Refer to
“Understanding the Swipe Area Carousel”
on page 31 for more information
about the Swipe Area.
Power
Button
Swipe Area
Swipe
Left, Right, Up, Down