Owner's Manual

35
Commander Touch User Guide
Channel Lock
The channel lock feature allows you to lock access to individual channels. A 3-digit numerical code
controls access to locked channels.
Locked channels are skipped when you tune channels
using the Channel Up/Down icons T S. When you
browse a channel/category list, a lock icon is shown to
the right of the channel number indicating it is locked. In
the favorites page, locked channels are shown with a red
border on the favorite button.
If you attempt to tune to a locked channel, either by
using direct tune, through the channel/category list, or a
favorite channel, you’ll be prompted to enter your 3-digit
code. When the correct code is entered, the channel
will be tuned. All locked channels become unlocked and
remain unlocked until you turn Commander Touch off,
and back on. In the category list, the previously locked
channels will show an unlocked icon.
Turning Channel Lock On/Off
By default the Channel Lock feature is off. You’ll need to select a lock code and turn the feature
on before you can lock channels. You can also use the Channel Lock On/Off feature to temporarily
disable Channel Lock. When you turn Channel Lock off, Commander Touch will remember the
channels you had locked. When you turn Channel Lock on again, the channels will again be locked.
1. In the Swipe Area, swipe to Settings, swipe up or down if necessary, and tap Channel Lock.
2. At the Channel Lock screen tap Set Lock Code and you will be prompted to enter a lock code.
Enter 3 digits and tap Go.
3. A confirmation screen will display the code you
have entered. Make a note of the lock code and tap
OK.
4. The Channel Lock screen will be displayed. Tap
Channel Lock On/Off to turn the Channel Lock
feature on or off.
5. Tap the Back icon in the upper left corner to exit.
Locking and Unlocking Individual Channels
If you have not yet turned Channel Lock on, you’ll need to follow the procedure above to turn
Channel Lock on before you can lock or unlock channels.
1. In the Swipe Area, swipe to Settings, swipe up or
down if necessary, and tap Channel Lock.
2. You will be prompted to enter the lock code. Enter
the lock code and tap Go.
3. Tap Lock/Unlock Individual Channels [ ].
4. Channels are listed according to category. Tap
Commander Touch Features