Owner's Manual

47
Commander Touch User Guide
Saving FM Channel Presets
1. In the Swipe Area, swipe to Settings, swipe up or down if necessary, and tap FM.
2. Tap the up and down icons to change the
FM channel. The new FM channel is immediately
tuned.
3. Tap one of the 4 preset buttons at the bottom
of the screen. You can tap an empty FM preset
button with a
+ to set a new FM preset, or tap an
existing FM preset button to change it to the new
FM channel.
4. An advisory will tell you the FM channel, and to set you vehicle radio to the same FM channel.
Tap the OK button.
5. Tap the Back icon in the upper left corner to exit.
Selecting an FM Channel or FM Preset
1. In the Swipe Area, swipe to Settings, swipe up or down if necessary, and tap FM.
2. To select an FM channel, either tap the up and down icons to change the FM channel
and immediately tune the FM channel, or tap one of the 4 preset buttons at the bottom of the
screen to tune the FM channel. (If you tap an empty FM preset button with a
+ the FM channel
will be saved as a new FM preset. If you tap an existing FM preset button it will change the FM
preset to the new FM channel.)
3. Tap the Back icon in the upper left corner to exit.
Display Options
Display Options allows you to change the brightness of
the of the display screen. You can set the brightness for
day and night, and also select the mode.
Changing the Display Mode
The display mode can be set three different ways:
~Auto: Commander Touch will automatically adjust the screen brightness to the brightness
setting you have selected for day and for night if the Illumination wire has been connected
to your vehicles lighting system. When the lights are on, the display will change to the Night
setting. When the lights are off, the display will change to the Day setting.
~Day: The screen brightness will always be at the brightness setting you have selected for day.
~Night: The screen brightness will always be at the brightness setting you have selected for
night.
1. In the Swipe Area, swipe to Settings, swipe up or
down if necessary, and tap Display Options.
2. Tap Display Mode and tap the desired mode
button, Auto, Day, or Night.
3. Tap the Back icon in the upper left corner to exit.
Settings