Owner's Manual

3
2
4
A. Mount the Magnetic Mount Antenna outside your vehicle, on a clean and dry horizontal surface
that will always face the sky.
B. Choose the location for the antenna according to your type of vehicle. Center it between the
left and right sides, and away from other antennas.
TIP: Use the Alcohol Prep Pad to clean the surface.
Sedans and Coupes
(above front windshield or rear window)
Pickups
(above front windshield)
SUVs
(rear of roof)
Convertibles
(leading edge of trunk)
A. Connect one end of the Display Cable to the
Intelligent Power Adapter and the other end
to the Roady BT display.
B. Insert the Intelligent Power Adapter into your
vehicle’s cigarette lighter or power adapter
socket.
C. Roady BT should power on automatically. If
not, press the Power button on Roady BT to
turn it on.
Mount the Magnetic Mount Antenna
Connect the Intelligent Power Adapter
Route the Antenna Cable
NOTE: These instructions are for a sedan or coupe where the
antenna is mounted above the front windshield. The Roady BT User
Guide has detailed antenna cable routing instructions for all types of
vehicles. Go to www.siriusxm.com/guides for the User Guide.
A. Tuck the antenna cable under the rubber molding around
the glass and run it to the nearest corner.
B. Route the cable out of the molding and into the rubber
weather stripping around the door opening.
C. Lift the weather stripping. Tuck and run the cable inside it
to the bottom of the door opening. Replace the weather stripping.
D. Pull the cable out and route it to the Roady BT Intelligent Power Adapter.
E. Plug the Magnetic Mount Antenna connector into the ANT connector
on the Intelligent Power Adapter.
TIP: Include enough slack in your routing to accommodate open doors or the hood
lid. Coil any excess cable in a hidden location and keep it away from any vehicle
pedals or controls.
Intelligent Power
Adapter Location
AUDIO FM ANT