Owner's Manual

5
6
Decide on one of the in-box audio connection options, Aux or Bluetooth®, or you can connect the audio using
an FM Direct Adapter (FMDA25) (sold separately, professional installation recommended). Refer to the three
following sections for each audio option installation.
Note that initially no audio connection option is selected for Roady BT. For each of the following audio
connection options you will first need to select the desired audio option before the SiriusXM audio can be
heard.
Aux: Best: Connect the audio using the provided Aux Audio Cable if your vehicle’s radio/headunit has an auxiliary input jack.
A. Plug one end of the Aux Audio Cable into the AUDIO connector of the
Intelligent Power Adapter and the other end into the auxiliary input (Aux
or Audio) jack in the vehicle.
B. Turn on your vehicle’s radio/headunit and set it to play from the
auxiliary input source.
C. Press the Menu button on Roady BT and then, press to highlight
Audio Settings and press Select.
D. Audio Output will be highlighted. Press the Select button until AUX
is shown as the selected audio output.
E. Wait a moment while the Aux audio is enabled and then you should
hear channel 1 playing through the radio/headunit.
TIP! Refer to your vehicle owner’s manual to find the location of the
auxiliary input jack, or consult the vehicle dealer.
Bluetooth: Best: Connect the audio using Bluetooth if your vehicle’s radio/headunit supports Bluetooth.
Note that Roady BT is only compatible with radios and headunits which support the Bluetooth audio streaming protocol. If the
vehicle radio/headunit only supports the Bluetooth phone protocol, Bluetooth cannot be used for the Roady BT audio connection.
A. Temporarily turn off Bluetooth capability in any devices that you may have with you during the installation, such as a cellphone,
to avoid other devices connecting to the vehicle’s radio/headunit instead of Roady BT.
B. Place the vehicle’s radio/headunit in Bluetooth pairing mode. Refer to
the vehicle owner’s manual for instructions on how to do this.
C. Press the Menu button on Roady BT and then, press
to highlight
Audio Settings and press the Select button.
D. Audio Output will be highlighted. Press the Select button until
Bluetooth is shown as the selected audio output, and then wait a
moment while Bluetooth is enabled.
E. Press
to highlight Bluetooth Settings and press the Select button.
A. Be sure the vehicle is outside and the antenna has a clear view of the sky.
B. Verify that you are receiving the XM signal. The Roady BT Radio should be tuned to XM channel 1, the XM Preview channel.
There should at least be two bars in the upper right corner of the Now Playing screen that denotes antenna signal strength. If
not, be sure that you have mounted the antenna on the outside of the vehicle, as shown in step 2, and that the vehicle is parked
outdoors with a clear view of the sky. Move the vehicle away from any obstructed area, for example, if you are parked in a
garage, or parked near a large structure.
C. You can also press the Menu button and then press
to scroll to
and highlight Signal Indicator. Press the Select button. The Satellite
and Terrestrial bars show the strength of the signal being received.
If the signal reception is good, press and hold the Menu button to
return to XM channel 1, the XM Preview channel.
Verify Signal Reception
Connect the Audio
6
7
AUDIO FM ANT
AUX