Quick Start Guide

ManualsBrandsSiriusXM ManualsCar Audio & VideoSXVRBT1

6 ?7

F. Add New Bluetooth Device will be highlighted. Press the Select button.

G. The Pair Bluetooth Device message is displayed. Verify that the vehicle’s

radio/headunit is on, is discoverable and in pairing mode and press the

Select button to continue.

H. Wait as Roady BT searches for discoverable Bluetooth devices. When the

vehicle’s radio/headunit is shown in the list, press to highlight the name

and press the Select button. (If you don’t know the Bluetooth name of the

radio/headunit, refer to the vehicle owner’s manual for the name.)

I. Roady BT will begin pairing and when connected will display a

Successfully Connected message. Wait a moment until you hear channel

1 playing through the radio/headunit.

J. Press the Select button. Press and hold the Menu button to exit to the

Now Playing screen.

If Roady BT was unsuccessful in pairing and

connecting, a different Bluetooth pairing and

connecting method may necessary for this

vehicle’s radio/headunit. Please refer to the

Roady BT User Guide for additional pairing and

connecting methods (siriusxm.com/guides),

and also the Roady BT FAQs for the very latest

Bluetooth tips and information.

FM: Good: Connect the audio using the FM feature of Roady BT

to p

lay the audio through your vehicle’s

FM radio.

A. Purchase an FM Direct Adapter (FMDA25) and follow the instructions

included with the FM Direct Adapter and install the FMDA25.

B. Connect the FM cable from the FMDA25 to the FM connector on the

Intelligent Power Adapter.

C. Press the Menu button on Roady BT and then, press to highlight

Audio Settings and press the Select button.

D. Audio Output will be highlighted. Press the Select button until FM

is shown as the selected audio output and wait a moment while the FM

audio is enabled.

E. Set Roady BT to transmit on the same FM channel that you have

selected on your vehicle’s FM radio:

i. Press the Menu button on Roady BT and then press to scroll to

and highlight Audio Settings and press the Select button.

ii. Press

to scroll to and highlight FM Channels and press the Select button.

iii. Press

to scroll to and highlight FM2. Press the Select button.

iv. Press and to tune in steps of .2, or press and to tune in

steps of 1 to select the available FM channel you have chosen. Press

the Select button to select the FM channel.

vi. The selected FM channel will be confirmed on the display screen.

Press and hold the Menu button to return to the Now Playing screen.

F. You should hear channel 1 playing through the vehicle’s FM radio. If you

are not satisfied with the audio quality, try a different FM channel.

TIP! You may ﬁnd an FM channel with static or silence on the vehicle’s FM radio

that does not work with Roady BT. It is possible that some type of inaudible

interference is present that prevents reception of the SiriusXM broadcast. The

options are to use another FM channel or a different audio connection method.

MATCH FM CHANNELS

234567890

99.3

Connect the Audio (continued)

CAUTION: Do not attempt to install, activate, or adjust any of the

setting options described in this Quick Start Guide unless your

vehicle is parked in a safe location.

When listening to a channel,

information about the channel

and what is currently playing

is displayed on the Now

Playing screen.

The Roady BT User Guide

is available at:

www.siriusxm.com/guides.

Roady BT Now Playing Screen

You can follow either the general activation and subscription process or use the on-board

activation guide to activate your Roady BT and subscribe to the SiriusXM service.

General Activation and Subscription Process:

A. Make sure Roady BT is turned on, receiving the XM

signal, and tuned to XM Preview channel 1 so that you

can hear SiriusXM audio.

B. Make a note of your SiriusXM Radio ID. You can find it by

selecting Radio ID in menu items, by tuning to channel

0, on a label on the bottom of the gift box, and on the

label on the Intelligent Power Adapter.

NOTE!

The SiriusXM Radio ID does not use the letters I, O, S, or F.

C. To subscribe:

• Online: Go to www.siriusxm.com/activatenow to access or set up an online

account, subscribe to the service, and activate your Radio.

• By phone: Call 1-866-587-4225.

Activation usually takes 10 to 15 minutes after you have completed the subscription process,

but may take up to an hour. We recommend that your Radio remain on until subscribed. Once

subscribed, the Radio will receive and you can tune to the channels in your subscription plan.

Press or to tune to other channels, and or to browse the different categories of

channels. Learn what all the Roady BT buttons do in the panel below.

Activation Guide:

For your convenience, Roady BT has an on-board activation guide. You can activate your radio

and subscribe to the XM service by using this guide, where you will be guided step-by-step

through the subscription process. To access and use the guide,

simply follow these steps:

A. Turn Roady BT on and press the Menu button.

B. Activate Radio will be highlighted. Press the Select

button.

C. Follow the directions on each successive screen until

you complete the subscription process.

Self installation instructions and tips are provided for your convenience. It is your

responsibility to determine if you have the knowledge, skills and physical ability

required to properly perform an installation. SiriusXM shall have no liability for

damage or injury resulting from the installation or use of any SiriusXM or third

party products. It is your responsibility to ensure that all products are installed

in adherence with local laws and regulations and in such a manner as to allow

a vehicle to be operated safely and without distraction. SiriusXM product

warranties do not cover the installation, removal or reinstallation of any product.

Sirius XM Radio Inc.

1221 Avenue of the Americas, 36th Floor

New York, NY 10020

1.866.635.2349

siriusxm.com

SXVRBT1QSG 220120a

Roady BT Button Functions

Magnetic Mount

Antenna

Antenna & Dash Mount

Alcohol Preparation Pads

Aux Audio Cable

Dash Mount

Vent Mount and

Extended Vent Clamps

Roady BT Display

234567890

AUDIOFM ANT

*The phone number shown above

may differ from the one shown on

Roady BT. All numbers are valid.

Left and Right Buttons

Press to search for channels by category.

234567890

Power Button

Press to turn Roady BT on and off.

Up and Down Buttons

Press to navigate

up/down through

channels, menus,

and lists; press and

hold to scroll

continuously.

Menu Button

Press to access advanced features and conﬁguration

options; when in conﬁguration options, press and

hold to return to the Now Playing screen.

Select Button

Press to conﬁrm selection of highlighted item in a

menu or list; press and hold to set a Song, Artist, or

Game Alert at the Now Playing screen.

Day/Night Brightness Button

Press to toggle between

day and night brightness

setting; press and hold to

enter display settings in the

Menu.

Play/Pause, Rewind, Fast-Forward Buttons

Play/Pause: Press to pause or resume playing the

channel; press and hold to jump to live.

Rewind: Press to skip back to the beginning of the

song/segment; press and hold to continuously skip

back.

Fast-Forward: Press to skip forward when listening

behind live broadcast; press and hold to continuously

skip forward when listening behind live broadcast.

Jump Button

Press to go back to

the previous channel

to which you were

listening.

Bank/Direct Tune Button

Press to toggle between favorite banks A & B; press

and hold to enter Direct Tune and enter a channel

number to tune.

Number Buttons

Press to tune to a stored

favorite channel; press and

hold to store a favorite

channel. Also used to enter

channel numbers when the

Direct button is pressed.

Speciﬁcations

System

Power Requirements: 9-16 V DC,500 mA (max)

Operating Temperature: -4°F to +140°F (-20°C to +60°C)

Audio Output: 1.0 V

rms

(max)

Roady BT Display

Dimensions: 5.0 in (W) x 2.7 in (H) x 0.64 in (D)

128 mm (W) x 68 mm (H) x 16.35 mm (D)

Weight: 4.1 oz (117 g)

Intelligent Power Adapter

Dimensions: 3.7 in (W) x 2.1 in (H) x 1.2 in (D)

94 mm (W) x 54 mm (H) x 31 mm (D)

Weight: 1.9 oz (57 g)

Input / Output: 9-16 V DC / 5 V DC, 1.0 A

Audio Connector: 1/8 in (3.5 mm) female

Antenna Connector: SMB male

FM Connector: 3/32 in (2.5 mm) female

Vehicle Antenna

Type: SiriusXM Magnetic Mount

Connector: SMB female, right angle

Cable Length: Approximately 23 ft (7.0 m)

Aux Audio Cable

Connectors: 1/8 in (3.5 mm) stereo male to

1/8 in (3.5 mm) stereo male

Cable Length: Approximately 4 ft (1.2 m)

Display Cable

Connectors: USB Micro-B male to male

Cable Length: Approximately 6 ft (1.8 m)

Important Legal Information

Magnetic Adapter Extra Adhesive

What’s in the Box?

Channel Number Signal Strength

Album Art

Channel Logo

Current Favorite Bank

Audio Source (Bluetooth, Aux, FM)

Favorite Channel

Artist or Show Name

or Talk Show Host

Or Sports Teams/Score

Song Name

or Talk Show Schedule

Or Game Time/Details

Content/Channel

Information

Replay Timeline

TuneStart (or mute)

Indicator

Channel Category

Display Cable

Intelligent Power Adapter

QUICK START GUIDE

Scan here

for activation

offers