User Manual

18
Roady BT User Guide
lowest corner.
3. At the lowest corner of the windshield, route the cable out of the windshield molding and into the
rubber weather stripping around the door opening. Lift the weather stripping from the opening
and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the
weather stripping to the bottom of the door opening.
4. Pull the cable out of the weather stripping at the bottom of the door opening and route it under
the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire
ties.
5. Bring the end of the cable out at the Intelligent Vehicle Dock location.
Leave yourself enough cable so you can easily connect it to the antenna
connector of the dock.
6. Continue with “Step 5: Connect the Magnetic Mount Antenna and Display
Cable” on page 18.
Step 5: Connect the Magnetic Mount Antenna and Display Cable
1. Plug the Magnetic Mount Antenna connector into the ANT
connector on the Intelligent Power Adapter.
2. Connect one end of the Display Cable to the Intelligent Power
Adapter and the other end to the Roady BT display.
3. Insert the Intelligent Power Adapter into your vehicle’s cigarette
lighter or power adapter socket.
4. Roady BT should power on automatically. If not, press the Power
button on Roady BT to turn it on.
Installation
AUDIOFM ANT