User Manual

22
Roady BT User Guide
Method A: Bluetooth pairing from Roady BT to the radio/headunit
1. Temporarily turn off Bluetooth capability in any devices that you may have with you during
the installation, such as a cellphone, to avoid other devices connecting to the vehicle’s radio/
headunit instead of Roady BT.
2. Turn on the vehicle’s radio/headunit and place it in Bluetooth pairing mode. Refer to
the vehicle owner’s manual for instructions on how to do this.
3. Press Menu on Roady BT and then, press to highlight Audio Settings and press
the Select button.
4. Audio Output will be highlighted. Press the Select button until Bluetooth is
shown as the selected audio output, and then wait a moment while Bluetooth
audio is enabled.
5. Press to highlight Bluetooth Settings and press the Select button.
6. Highlight Add New Bluetooth Device and press the Select button.
7. The Pair Bluetooth Device message is displayed. Verify that the vehicle’s radio/headunit is on, is
discoverable and in pairing mode and press the Select button to continue.
8. Wait as Roady BT searches for discoverable Bluetooth devices. When the vehicle’s radio/headunit
is shown in the list, press to highlight the name and press the Select button. (If you don’t know
the Bluetooth name of the radio/headunit, refer to the vehicle owner’s manual for the name.)
Installation