User Manual

Table Of Contents

Roady BT User Guide

3. Auto Shut Off will be highlighted. Press the Select button to toggle between enabled or

disabled.

4. Press and hold Menu to return to the Now Playing screen.

Factory Settings

Conﬁguration changes and personal settings can be removed with a factory reset, and Roady BT

returned to its original out-of-the-box condition. Please note that a factory reset will not change or

affect Roady BT’s subscription status.

NOTE! Factory Settings permanently removes all conﬁguration and personal settings and

cannot be undone. In particular, the audio connection conﬁguration will have to be done

again after a factory reset.

1. Press Menu.

2. Press to scroll to and highlight Factory Settings and press the

Select button.

3. A confirmation screen will be displayed. If you are certain that you

want to reset your Roady BT to the factory settings, press the Select

button to proceed, or press Menu to cancel.

4. Press and hold Menu to return to the Now Playing screen.

5. Note that the No Audio Connection message will be displayed on the Now Playing screen

because the audio output selection has been reset to none selected. Refer to “Step 6: Connect

the Audio” on page 19 for audio connection options.

Software Update

Software Update is where a new software release for Roady BT is installed. Until a software update

has been copied to the Roady BT display, Software Update is not selectable.

There are several requirements for a software update:

1. A special cable (which will be made available on the Roady BT product support page).

2. A Microsoft® Windows® based computer, or an Apple® computer, with Internet access, is required

for downloading the software update from SiriusXM. Also, a USB A-type connection on the

computer is required to copy the software update to the Roady BT display.

Detailed information will be made available on the Roady BT product support page if a software

update is available.

Conﬁguring Your Roady BT