HIGH PERFORMANCE AUDIO WS-bb -1O WS-BB-1O High Performance Marine Receiver OWNER'S MANUAL
Dear Customer, Thank you for purchasing Wet Sounds! Congratulations! Thank You for purchasing the Wet Sounds WS-BB-10 High Performance Marine Receiver! Wet Sounds professional marine audio products represent the ultimate in high performance marine audio. Wet Sounds products are specifically engineered to withstand the rigorous marine environment. Please take a moment to read the instruction manual & connection guide before starting the installation.
Specifications Model WS-BB-10 Operating Voltage 10.5V - 16V Fuse Rating 15A 25 W X 4 @ 4 Ohms RMS 50 W x 4 @ 2 Ohms Peak Power Output Max. RCA Output Voltage 4V Output Impedance 500Ω Frequency Response 20 - 20kHz FM Frequency Range 87.5MHz - 107.9MHz AM Frequency Range 530kHz - 1710kHz WB Frequency Range 162.40 - 162.55 (US & Canada) Tuner Presets 18 FM / 12 AM / 6 WB / 18 SXM Clock No Clock Display N/A Bluetooth 3.0+EDR, A2DP 1.3 USB Compatibility 2.
ORANGE / WHITE RED YELLOW Wiring Diagram 6 PIN CONNECTOR B A 10A FUSE RED BLACK BLACK SWI INPUT FUSE 10A BLACK BLUE BLACK BLUE / WHITE BLACK ANTENNA INPUT B A BLACK BLACK SIRIUSXM INPUT AUX IN Left WHITE AUX INPUT AUX IN Right RED BLACK RED BLACK BLACK USB USB INPUT BLACK BLACK 5 13 DIN CABLE (Black)
Installation / Mounting Mounting Contents • Source Unit To mount the unit, you will need to find a flat surface with adequate support material that provides a secure mounting location. • Installation & Operation Manual 1. Once you have determined a mounting location, you will need to mount the unit vertically with the wire harnesses facing down. Note: Mounting the unit vertically is the best for water resistance. Installation Considerations 2.
Settings 7 BAND EQ Short press the encoder button to access the 7 BAND EQ settings. Use the rotary encoder to scroll through the EQ settings. (FLAT > ROCK > CLASSIC > ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP > CUSTOM) When setting up the CUSTOM EQ, short press the encoder button to set the first frequency. Once active, rotate the encoder to adjust the frequency settings. Short press encoder button again to access the next frequency. Repeat until all EQ settings are complete.
Settings Basic Operation DISCOVERABLE Rotate the encoder button to select if unit is discoverable for pairing. (ENABLE > DISABLE) Once enabled, the source unit is now discoverable and ready for pairing to your device. Open the Bluetooth settings on your device to find the source unit and select.
Operation tunes to nearby radio stations with sufficiently strong signals for good reception. In areas where reception is poor, switching to distance tuning enables the unit to tune in to more distant stations. Distance tuning is the default. REMOVE PRESETS Short press the encoder button on the REMOVE PRESETS option. You will need to be under the PRESET group you want to adjust first (FM1>FM2>FM3). Using this feature allows you to remove saved stations on the unit.
Operation SHUFFLE Short press the encoder button to access the SHUFFLE feature options (OFF>ALL). This feature allows you to set your preference on shuffling tracks or songs. NOTE: When using a USB extension cable, it must be a powered extension cable. The maximum distance for the cable is 33 feet (10 meters). Bluetooth® Operation After your device is paired to the source unit, this feature allows you to control playback from your device directly from the unit.
Operation PRESETS Short press the encoder button to access the PRESETS list. Using this feature allows you to see what PRESETS are saved on the unit. ADD PRESETS Short press the encoder button on the ADD PRESETS option. You will need to be on both the channel and PRESET group you want to add first (SXM1>SXM2>SXM3). Using this feature allows you to save channels to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the channel saved to.
Troubleshooting Symptom / Advisory Diagnosis Remedy Basic Source unit does not turn on. Blown fuse Check fuse of the unit, replace with correct rating. Vehicle’s ignition is off If connected following the instructions, the unit will not operate with ignition off. Voltage applied to Red wire is not between 10.5 & 16 volts or there is no voltage present Check battery, connections and fuses and repair or replace as necessary.
Troubleshooting Verify that your vehicle is outdoors with a clear view of the sky. Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. No Signal The SiriusXM Connect Tuner is having difficulty receiving the SiriusXM satellite signal. Move the SiriusXM antenna away from any obstructions. Inspect the antenna cable for damage and kinks. Consult the SiriusXM Connect Tuner installation manual for more information on antenna installation.
EU Declaration of Conformity (DoC) Hereby we, Name of manufacturer Wet Sounds, Inc. Address: 10621 S. Sam Houston PKWY W ste 100 Houston, TX. 77071, USA Zip code & City: Houston Country: USA Telephone number: (877) 938-7757 declare that this DoC is issued under our sole responsibility and that this product: Product description: Media Receiver Box Type designation(s): WS-BB-10 Trademark: Wet Sounds Software version V1.0 Hardware Version V1.
