Owner's Manual

10
Settings
DISCOVERABLE
Rotate the encoder button to select if unit is discoverable for pairing.
(ENABLE > DISABLE) Once enabled, the source unit is now discoverable
and ready for pairing to your device. Open the Bluetooth settings on your
device to find the source unit and select.
DEVICE
Selecting DEVICE by short pressing the encoder button will allow you
to rename the source unit with up to 16 characters. This gives you
the ability to have a unique name for easy identification during device
pairing. Short press the encoder button to select the letter to be changed
and rotate the knob to change the value. Repeat process until desired
name is reached.
BEEP
Short press the encoder button to access the BEEP options. Rotate the
encoder button to turn system beep ON/ OFF.
TUNER REGION
To adjust, short press the encoder button to access. Rotate the encoder
button to select the TUNER REGION of your preference. (EUROPE > USA
> RUSSIA > LATIN > ASIA > JAPAN > MIDEAST > AUSTRALIA)
SOFTWARE
VERSION - Short press the encoder button to display the current
firmware version of the unit.
UPDATE - Short press the encoder button to update the firmware. Follow
the instructions on the screen when updating.
THEME
To adjust the THEME, short press the encoder to access the feature.
Rotate the encoder button to select the desired THEME (DAY, NIGHT,
AUTO)
FACTORY DEFAULT
AUDIO – Short press the encoder button to access. Rotate the encoder
button to select YES/NO. Selecting YES will reset your unit back to
factory default settings.
SYSTEM - Short press the encoder button to access. Rotate the encoder
button to select YES/NO. Selecting YES will reset your unit back to
factory default settings.
NOTE: Resetting the SYSTEM settings will also reset any SiriusXM user
data.
Basic Operation
TURNING THE UNIT ON / OFF
Long press the SRC (Power) button to turn the unit ON or OFF
ADJUSTING THE VOLUME
Long press the encoder button to independently adjust the volume for
a specific zone (ZONE ALL>ZONE1>ZONE2>ZONE3>ZONE4). Rotate
encoder knob left or right to desired volume level (0-40). The current
volume level will be displayed during adjustment.
ADJUSTING THE SUBWOOFER OUTPUT
Press the SUB + or SUB- buttons to adjust the output level (0-20).
ADJUSTING THE SCREEN BRIGHTNESS
Long press the ZONE/DIMMER button to adjust the brightness level.
There are two brightness levels.
SELECTING A SOURCE TO PLAY
Short press the SRC button to show the different source options (FM
TUNER>AM TUNER>WB TUNER>USB>AUX1>AUX2>BLUETOOTH>
SiriusXM>CAMERA). Use the rotary encoder or short press the
SRC button to scroll through sources.
SELECTING A ZONE
Short press the ZONE button to toggle between source zones (ZONE
1>ZONE 2>ZONE 3>ZONE 4)
Tuner Operation (FM/AM/WB)
To operate, use the rotary encoder to select the tuner source you want to
listen to (FM>AM>WB).
To AUTO SEEK stations, short press the FWD and REV buttons. To
MANUAL SEEK stations, long press the FWD and REV buttons to tune to
the desired frequency.
To MUTE the TUNER, short press the PLAY/PAUSE button.
FM BAND SETTINGS
To access the FM BAND SETTINGS, short press the MENU when
using the FM TUNER source. This will give you access to the settings
specific to the FM TUNER (PRESETS>ADD PRESETS>REMOVE
PRESETS>FM>AUTO STORE>LOCAL>RBDS).
PRESETS
Short press the encoder button to access the PRESETS list. Using this
feature allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option. You will
need to be on both the station and PRESET group you want to add first
(FM1>FM2>FM3). Using this feature allows you to save stations to the
unit. Once selected, use the rotary encoder to select the PRESET number
(1-6) you want the station saved to.