User guide

42
NOTE! If you are using the Vehicle Dock from the
Universal Xpress Car Kit instead of the
PowerConnect Vehicle Dock which came with your
Onyx, you will have to disable AUX Detect. Refer to
“Using the Vehicle Dock From the Universal Xpress
Car Kit” on page 81, and complete the additional
instructions before continuing with the next step. The audio connection will
be through your vehicle’s FM radio, but it is not PowerConnect.
8 Set your Onyx to transmit on the same FM channel that you have
selected in step 7:
i. Press menu.
ii. Press to scroll to and highlight
FM Settings and press the Select
button.
iii. FM Channels will be highlighted.
If it is not highlighted, press to
scroll to and highlight FM
Channels. Press the Select button.
iv. Press to scroll to and highlight
the storage location FM 2 and
press the Select button.
v. Tune to the available FM channel
you choose in step 3. Press and
to tune in steps of .2, i.e., 99.3
to 99.5. Press and to tune in
steps of 1, i.e., 99.3 to 100.3. Press
the Select button to select the
FM channel.
vi. Start Using is highlighted. Press
Set your vehicle radio to the
above channel to enable audio.
99.3 FM
FM Channels
current
FM 1
FM 2
FM 3
FM 4
FM 5
97.9
_ _ _
_ _ _
_ _ _
_ _ _
Vehicle Installation