Owner's Manual

44
your vehicle’s FM radio to an available channel, you should only hear static
or silence – not talk or music.
Once you have found an available FM channel, you’ll need to tune Onyx
EZ and your vehicle’s radio to the same FM channel to receive XM audio
through your vehicle’s radio.
We recommend one of the following methods to find an available FM
channel:
1. Use the SiriusXM FM Channel Finder
Use the SiriusXM FM Channel Finder at www.siriusxm.com/frequency.
Go to the website and enter your zip code. The Channel Finder will
suggest a list of available FM channels in your area. For convenience,
write down or print out the list.
Tune Onyx EZ to a favorite XM channel (or to channel 1, if it’s not
activated). Turn on your vehicle’s FM radio. Pick the first FM channel on
your Channel Finder list and tune the FM radio to that channel. If you do
not hear a local FM station broadcast, then tune Onyx EZ to the same
FM channel. (Refer to “Set and Select an FM Channel” on page 46.)
You should hear the XM channel through your vehicle’s radio. If you are
satisfied with the sound quality, you’re done! If this FM channel doesn’t
work well for you, work down the list until you find an FM channel that
allows you to hear XM clearly.
OR
2. Manually tune through your local FM channels
Manually tune through your local FM channels on your vehicle’s FM
radio. Turn on your vehicle’s FM radio. Start at 88.1 and use the ‘Manual’
tune function on your vehicle’s FM radio to tune through each FM
channel one-by-one (88.1 followed by 88.3 etc.) to locate channels that
aren’t being used by a local FM radio station. Write down each FM
Using Onyx EZ With a Vehicle Dock