Operating Instructions
Table Of Contents
- Table of contents
- 1 Dear Customer,
- 2 General data
- 3 General description
- 4 Safety
- 5 Installation and startup
- 5.1 Transport and unpacking
- 5.2 Disposal of packaging materials
- 5.3 Installation site
- 5.4 Commissioning
- 5.4.1 Functional elements
- 5.4.2 Supplied tools
- 5.4.3 Touch display description
- 5.4.4 Illumination of the processing chamber, LED light strip, and On/Off button
- 5.4.5 Using the processing chamber screen
- 5.4.6 Installation
- 5.4.6.1 Connecting to the PC via LAN
- 5.4.6.2 Connecting the unit to the power supply
- 5.4.6.3 Installing the unit
- 5.4.6.4 Connecting the suction device (optional)
- 5.4.6.5 Connecting to the PC via WLAN (option)
- 5.4.6.6 Operating several production units at one access point
- 5.4.6.7 Connecting to the PC via the wireless interface (optional)
- 5.4.7 Filling the water tank
- 5.4.8 Switching the unit ON and OFF
- 5.5 Repacking
- 5.6 Scope of supply
- 5.7 Storage
- 6 Operation
- 7 Service
- 7.1 Using the cleaning hose and the wet cleaning process
- 7.2 Changing filter bags and HEPA filters
- 7.3 Changing the water
- 7.4 Instruments
- 7.5 Care, cleaning agents, and disinfectants
- 7.6 Cleaning surfaces
- 7.7 Replacing the main fuses
- 7.8 Changing the filter
- 7.9 Removing water from the unit
- 7.10 Using the tank cap opener
- 8 Technical description
- 9 Disposal
- 10 Consumable
- Index
Dentsply Sirona
Operating Instructions CEREC Primemill
3 General description
3.2 Intended use
67 19 681 D3439
D3439.201.01.01.0209.2019
9
3.2
Intended use
This device is used for computed-aided production of dental
restorations, abutments, parts of abutments and drilling templates for
implant placement.
This unit must not be used for any other purpose. If the unit is used for
any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating
Instructions and the relevant maintenance instructions.
CAUTION
Follow the instructions
If the instructions for operating the unit described in this document are
not observed, the intended protection of the user may be impaired.
For the USA only
CAUTION:
According to US Federal Law, this product may be sold only
to or by instruction of physicians, dentists, or licensed professionals.
Dry processing
CAUTION
In the event of dry processing without a suction device, dust can be
created from the materials being processed. Breathing in this dust
can have associated health risks. As such, observe the information
and requirements of the suction device.
Dry processing is only permitted in conjunction with CEREC Suction
devIce 230V or 120V.
● CEREC Suction Device 230 V/120 V, ordered together with the unit:
REF 6569730.
● CEREC Suction Device 230 V/120 V, if ordered separately:
REF 6580786.
NOTE
Before using dry processing, verify the functioning, correct connection
and the tightness of the connections. All available suction openings
must be free.
NOTE
Before dry processing check that the CEREC suction device contains
a functioning HEPA fine-dust filter.