Operating Instructions

Table Of Contents
7 Service
7.7 Replacing the main fuses
Dentsply Sirona
Operating Instructions CEREC Primemill
60
67 19 756 D3439
D3439.201.01.01.0209.2019
7.7
Replacing the main fuses
WARNING
Electric shock
Disconnect the power plug at the unit end before replacing the fuses.
NOTE
Fuse type
Use only fuses of the same type in the fuse holder!
Fuse holder
A Cover C Fuse holder
B Main switch D Fuse
Fuses: T3.15H250V Order no. 6445378
ü The power plug must be disconnected.
1.
Use a screwdriver to carefully pry off the cover of the fuses on the
back side of the unit.
2.
Pull out the fuse holder.
3.
Replace the defective fuses.
4.
Reinsert the fuse holder.
5.
Close the cover.