Operating Instructions
Table Of Contents
- Table of contents
- 1 Dear Customer,
- 2 General data
- 3 General description
- 4 Safety
- 5 Installation and startup
- 5.1 Transport and unpacking
- 5.2 Disposal of packaging materials
- 5.3 Installation site
- 5.4 Commissioning
- 5.4.1 Functional elements
- 5.4.2 Supplied tools
- 5.4.3 Touch display description
- 5.4.4 Illumination of the processing chamber, LED light strip, and On/Off button
- 5.4.5 Using the processing chamber screen
- 5.4.6 Installation
- 5.4.6.1 Connecting to the PC via LAN
- 5.4.6.2 Connecting the unit to the power supply
- 5.4.6.3 Installing the unit
- 5.4.6.4 Connecting the suction device (optional)
- 5.4.6.5 Connecting to the PC via WLAN (option)
- 5.4.6.6 Operating several production units at one access point
- 5.4.6.7 Connecting to the PC via the wireless interface (optional)
- 5.4.7 Filling the water tank
- 5.4.8 Switching the unit ON and OFF
- 5.5 Repacking
- 5.6 Scope of supply
- 5.7 Storage
- 6 Operation
- 7 Service
- 7.1 Using the cleaning hose and the wet cleaning process
- 7.2 Changing filter bags and HEPA filters
- 7.3 Changing the water
- 7.4 Instruments
- 7.5 Care, cleaning agents, and disinfectants
- 7.6 Cleaning surfaces
- 7.7 Replacing the main fuses
- 7.8 Changing the filter
- 7.9 Removing water from the unit
- 7.10 Using the tank cap opener
- 8 Technical description
- 9 Disposal
- 10 Consumable
- Index
Index Dentsply Sirona
Operating Instructions CEREC Primemill
70
67 19 756 D3439
D3439.201.01.01.0209.2019
Index
B
Base,21
Building installation,15
C
Calibration tools
Calibration phantom,41
Calibration pins,41
Care, cleaning, and disinfecting agents,59
CE mark,8
Connection
Ethernet,29
LAN,29
WLAN (Wi-Fi),34
Connection for suction,24
Connections,24
Cooling water nozzles,58
Customer Service Center,5
D
Dimensions,65
Disinfectant,59
Disposal of old electrical and electronic devices,66
E
enretec GmbH,66
F
Filter
mode,61
Order number,62
Fuse,24
Fuse type,60
Order number,60
Replacement,60
H
Humidity range,65
I
Installation site,22
Installing the unit
automatic,30
manual,30
removal,30
Instruments,58, 64
Changing a defective instrument,58
M
Main switch,24
Maintenance,15
Regulations,49
Manufacturer's address,5
Milling unit
Processing chamber,25
N
Nominal current,65
Nominal mains voltage,65
O
Operating mode,65
P
Packaging,20
Packing,39
Power connection,24
Product safety,16
Production unit
Overview,23
Touch display,27
Protection class,65
R
Repair,15
S
Safety instructions,6
Scope of supply,39