Know the SIRIUS Swift M1 Gimbals A. LED User Interface B. USB Port C. Folding Release Button D. Balance Adjustment Knob E. Tilting/Panning Control Knob F. Shutter Button G. Instant App Control Button #* Mobile phone is not included. H. Mode Switch Button J. Power Switch K. Function Key 1 L. Function Key 2 M. Wheel Dial N. Phone clamp P.
Included: Swift M1 Gimbals x 1 EPP Protective Case x 1 Tripod 1 USB Cable Unfold the Gimbals: ¥* To fold the Gimbals, follow the steps in reverse.
1. Download the SIRIUS Swift App The SIRIUS Swift App is required for use with the Gimbals. Search for the "SIRIUS Swift" App on your Mobile App Store or scan the QR code below to download. £4 The SIRIUS Swift app requires iOS 5.0 or later. 2. Charge and Power on/off the Gimbals Before use, plug the USB cable provided into the mini USB port on the handle and the other end to a power source (2A charging current) to charge for 2 hours.
Turn the Balance Adjustment Knob to level the mobile phone: Note: The Gimbals will not function properly if the phone is not balanced. 4. Connect the SIRIUS Swift App and the Swift M1 Gimbals 0 (@ Turn on the mobile Blusterous @ Power up the Gimbals @ Activate the SIRIUS Swift App and follow the steps to connect the App and the SIRIUS Swift M1 Gimbals.
5. Operation Wheel! Dial —— Nonparticipating Control Knob Shutter Button Mode Switch Button Instant App-~ Power Switch Control Button To power up or off the Gimbals, press and hold the Power Switch for 3 seconds. Press the shutter button to control shooting when connected to the App. () Press the Mode Switch Button to select one of the 4 Shooting Modes. (1) Tilting-Following Locked: Switch to lock the Tilting-Following feature while actively tracking the shooting object as you pan and roll the Gimbals.
Instant App Control Button: For instant shooting control via the App Control Button, connect the Gimbals to the SIRIUS Swift APP. To display the Option Menu, press the App Control Button. Turn the Wheel Dial to set options. Press the App Control Button fo exit the menu. Press the Fn button twice to activate the selected option and to close the App menu page. When the Gimbals connects with the App, the activated option will display at the bottom of the LED Ul. The following options are included: 1] No.
Function Keys located on the back of the Gimbals handle: r Function Key 1 Function Key 2 Function Key 1: Press and hold down the upper Function Key 1 to activate the "Panning-Following” mode. Track the shooting objects actively as you pan the Gimbals and the phone quickly or proceed to move on to the next scene. Function Key 2: Press and hold down the lower Function Key 2 to switch between” Tilting-Following” and "Locked" modes. Press the Function Key 2 twice to reset all axes.
1. Please avoid placing the Gimbals into fire or near hot substances or liquid. 2. Please avoid fall or external impact damaging the Gimbals. 3. Please charge the Gimbals with battery chargers in accordance with safety regulations. . Do not disassemble, repair or modify the Gimbals personally. . Forbid to clean the Gimbals with liquid cleaning agent. . Forbid to interfere by force when the Gimbals functions.
Limitations: Warranty is non-transferals. This warranty covers all defects encountered in normal use of the equipment and does not apply in the following cases: the equipment has been serviced by other than an authorized SIRIUS Service Center. . Damage to the equipment caused by modification, overloading, mishandling, abuse, accident, sand”*, corrosives, water damage” or by not following recommended use as instructed. No valid proof of purchase is provided.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
