Manual

6.4 Table call stations transmitter
1. Hold the switch pressed for several seconds to turn on the table call stations transmitter.
2. Hold the switch pressed again for several seconds to turn o the table call stations trans‐
mitter.
3. Press the main switch briey to mute the table call stations transmitter.
1.
Prepare the receiver for the synchronisation (see Ä ‘Synchronising transmitter and
receiver’ on page 32).
2. Hold the infrared sensor of the table call stations transmitter near the infrared sensor of
the receiver.
ð
The settings of the receiver are transmitted to the table call stations transmitter and
are displayed.
Turn the table call stations
transmitter on / o
Synchronising the table call sta‐
tions transmitter with the
receiver
Operating
Quad R 823, Quad H 823, Quad B 823, Quad C 823Quad R 470, Quad H 470, Quad B 470, Quad C 470
37
UHF Wireless System