User manual

Attach the included antennas to the rear panel of the transmitter. To improve the transmission

quality and to adapt to the spatial conditions they are rotatable and swivelling.

In case the space provided on the device for direct assembly of the antennas is not sucient,

for example because the space on the rack is narrow, you can use the optionally available

coaxial cable to assemble the antennas separately from the device.

Connect the audio outputs of the receiver to your mixer or your amplier. Ensure that only one

of the two outputs of the receiver (XLR or jack) is ever used at a time for the overall channel,

because faults might occur otherwise.

4.3 Handheld microphone (Quad H)

Unscrew the bottom housing section of the handheld microphone. Insert the batteries. Pay

attention to the correct location of the poles. The correct battery arrangement is illustrated in

the battery compartment. Close the battery compartment, screw the bottom housing section

back on, and switch the transmitter on.

4.4 Bodypack transmitter (Quad B)

Press the button on the rear side of the bodypack transmitter and pull the battery compart‐

ment cover downwards. Insert the batteries. Pay attention to the correct location of the poles.

Close the battery compartment and switch the transmitter on.

Attaching the antennas

Connecting audio and starting

Inserting batteries

Installation and starting up

Quad R 823, Quad H 823, Quad B 823, Quad C 823Quad R 470, Quad H 470, Quad B 470, Quad C 470

UHF Wireless System