Manual

1. Open the transmitter to expose the infra red sensor.
2.
Press /[IR].
ð
The display shows ‘------’ and the synchronisation starts.
3. Hold the infrared sensor of the transmitter near the infrared sensor of the receiver.
ð
The settings of the receiver are transmitted to the transmitter.
4. After successful synchronisation, the display shows ‘P-----’ .
1.
Press /[SCAN].
ð
The display shows ‘SCAN’ and ashes.
2. Hold the infrared sensor of the corresponding transmitter near the infrared sensor of the
receiver.
ð
The automatic synchronisation is carried out.
3. If the system does not nd a frequency and a free channel within ve seconds, it auto‐
matically returns to the default state.
Synchronising transmitter and
receiver
Automatic search for a free
channel and automatic synchro‐
nisation
Operating
32
Quad R 823, Quad H 823, Quad B 823, Quad C 823Quad R 470, Quad H 470, Quad B 470, Quad C 470
UHF Wireless System