User manual
Table Of Contents
n Ensure that the transmitter is switched o.
n Connect the microphone or instrument cable to the input on the transmitter (mini-XLR
panel connector).
n Turn on the transmitter and check the transmission by using the microphone or instru‐
ment. If necessary, adjust the amplication of the transmitter and the levels on your
mixing console or your amplier.
4.5 Table call stations transmitter (Quad C)
Open the lid of the battery compartment on the bottom side of the table call station, and
insert the batteries. Pay attention to the correct location of the poles. Close the battery com‐
partment and switch the transmitter on.
Connecting microphone of
instrument
Inserting batteries
Installation and starting up
Quad R 823, Quad H 823, Quad B 823, Quad C 823Quad R 470, Quad H 470, Quad B 470, Quad C 470
17
UHF Wireless System