User manual

20 Microphone head grill to prevent damage and to reduce wind and breath noise.
21 Display. Shows the frequency and the battery status of the microphone.
When the display starts to ash, replace the batteries of the microphone.
22 Infrared sensor
23 Main switch
Hold the switch pressed during several seconds to turn on the microphone.
Hold the switch pressed again during several seconds to turn o the microphone.
24 Lower housing part. Unscrew to open.
25 Switch for selecting the radio signal
Slide the switch on ‘H’ (high power) to use the microphone from a long distance. Slide the switch on ‘L’ (low power)
to use the microphone from a short distance.
26 Battery compartment for two AA batteries (LR06), 1.5 V or comparable rechargeable batteries
Connections and controls
Quad R 823, Quad H 823, Quad B 823, Quad C 823Quad R 470, Quad H 470, Quad B 470, Quad C 470
25
UHF Wireless System