User manual
Table Of Contents
1.
Prepare the receiver for the synchronisation (see
Ä
‘Synchronising transmitter and
receiver’ on page 32).
2. Hold the infrared sensor of the microphone underneath the display near the infrared
sensor of the receiver.
ð
The settings of the receiver are transmitted to the bodypack transmitter and are dis‐
played.
If you don't want to synchronise the transmitter with the receiver using the infrared sensor,
you can also set the transmission frequency manually.
1.
Press .
ð
The frequency display ashes.
2.
Use / to set the frequency.
3.
Press to conrm the selection.
ð
The display shows the set frequency. The setting is complete.
Synchronising the bodypack
transmitter with the receiver
Setting the frequency manually
Operating
Quad R 823, Quad H 823, Quad B 823, Quad C 823Quad R 470, Quad H 470, Quad B 470, Quad C 470
35
UHF Wireless System