Operation Manual

Sitecom ADSL2+ Modem DC-227

required if the source port or destination port has been entered.

Source Port

The source port of the selected protocol. You cannot configure this field

without entering the protocol first.

Destination Port

The destination port of the selected protocol. You cannot configure this

field without entering the protocol first.

Physical Port

The incoming ports. The selections include LAN ports, wireless port, and

the blank for not applicable.

Field Description

Outbound Priority The priority level for the traffic that matches this classification rule

. The

possible selections are (in the descending priority): p0, p1, p2, p3.

IP Precedence

Select this field to mark the IP precedence bits in the packet that match

this classification rule.

IP Type of Service Select this field to mark the IP TOS bits in the packet that match this

classification rule.

802.1p Select this field to mark the 3-bit user-priority field in the 802.1p

header of the packet that match this classification rule. Note that this

802.1p marking is workable on a given PVC channel only if

the VLAN tag

is enabled in this PVC channel.