Datasheet

CN-033
Serial ATA PCi card
8716502005550
5/20
Serial ATA is an advanced connectivity standard for hard-disks. The distinguishing features are: a higher data
throughput speed, easy to install thanks to smaller cables and an improved cooling system. In order to take advantage
of the benefits of this ATA standard, both your motherboard and your hard disk must have an ATA connector. If your
motherboard is not fitted with this standard, then this Serial ATA PCI card is an ideal solution. By installing this PCI
card in your PC, you have two Serial ATA connectors available to you in no time at all so that a reliable and fast data
transfer to and from your hard disk is made possible.
To be dated.
To be dated.
To be dated.
209 (W) x 145,5 (D) x 45 mm (H)
Serial ATA PCI card - 2 port
2 SATA cables
2 power cables
Diskette with controller drivers
CD with controller drivers and extra software
Windows 98SE/2000/ME/XP
Free PCI slot
CD Rom drive
Connect your Serial ATA hard disk to your PC
and experience high-quality storage
2 serial ATA channels to support one serial ATA device on
each channel.
RAID 0 and RAID 1 supported.
Compliant with serial ATA 1.0 specification at high transfer
rate of 1.5Gb per second.
Supports hard disk drives larger than 137GB.
Support 32-bit PCI slot.
Compliant with PCI Specification revision 2.3.
Driver support for Win9X, Win ME, Win2000, and Win XP.
Supports the Microsoft driver for the generic IDE operations
and Intel bus master DMA operations
Data sheet: CN-033
P. 1-1.