Operation Manual

• WAN Type is Dynamic IP Address. If the WAN type is not correct,
change it!
• Host Name: optional. Required by some ISPs, e.g. @Home.
• Renew IP Forever: this feature enable this product renew IP ad-
dress automatically when the lease time is being expired even
the system is in idle state.
4.4.1.4 PPP over Ethernet
• PPPoE Account and Password: the account and password your
ISP assigned to you. For security, this field appears blank. If you
don't want to change the password, leave it empty.
• PPPoE Service Name: optional. Input the service name if your
ISP requires it. Otherwise, leave it blank.
• Maximum Idle Time: the amount of time of inactivity before
disconnecting your PPPoE session. Set it to zero or enable Auto-
reconnect to disable this feature.
• Maximum Transmission Unit (MTU): Most ISP offers MTU
value to users. The most common MTU value is 1492.
4.4.1.5 PPTP
• My IP Address and My Subnet Mask: the private IP address
and subnet mask your ISP assigned to you.
• Server IP Address: the IP address of the PPTP server.
• PPTP Account and Password: the account and password your
ISP assigned to you. If you don't want to change the password,
keep it empty.
• Connection ID: optional. Input the connection ID if your ISP re-
quires it.
• Maximum Idle Time: the time of no activity to disconnect your
PPTP session. Set it to zero or enable Auto-reconnect to disable
this feature. If Auto-reconnect is enabled, this product will auto-
matically connect to ISP after system is restarted or connection is
dropped.
4.4.1.6 Virtual Computers