Operation Manual

So that anyone wishing to reach your host only needs to know the name
of it. Dynamic DNS will map the name of your host to your current IP
address, which changes each time you connect your Internet service
provider.
Before you enable Dynamic DNS, you need to register an account on
one of these Dynamic DNS servers that we list in provider field.
To enable Dynamic DNS click the check box next to Enable in the
DDNS field.
Next you can enter the appropriate information about your Dynamic DNS
Server.
You have to define:
• Provider
• Host Name
• Username/E-mail
• Password/Key
You will get this information when you register an account on a Dynamic
DNS server.
4.6.7 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol
designed to give a user the capability to remotely manage a computer
network by polling and setting terminal values and monitoring network
events.
Enable SNMP
You must check either Local or Remote or both to enable SNMP function.
If Local is checked, this device will response request from LAN. If Re-
mote is checked, this device will response request from WAN.
Get Community
Setting the community of GetRequest your device will response.