Operation Manual

Set Community
Setting the community of SetRequest your device will accept.
IP 1,IP 2,IP 3,IP 4
Input your SNMP Management PC’s IP here. User has to configure to
where this device should send SNMP Trap message.
SNMP Version
Please select proper SNMP Version that your SNMP Management soft-
ware supports.
4.7 Toolbox
4.7.1 Log
You can view the system log by clicking the Log button.
4.7.2 Firmware
You can upgrade firmware by clicking Upgrade button.
4.7.3 Back-up
You can backup your settings by clicking the Backup Setting button
and save it as a bin file. Once you want to restore these settings, please
click Firmware Upgrade button and use the bin file you saved.
4.7.4 Default
You can also reset this product to factory default by clicking the Reset
to default button.
4.7.5 Reboot