Operation Manual

Appendix A – TCP/IP setup
Set up TCP/IP
If you are using a Fixed (specified) IP address, the following
changes are required:
• The Gateway must be set to the IP address of the DC-202
• The DNS should be set to the address provided by your ISP.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automati-
cally. This is the default Windows setting. Using this is recommended.
By default, the DC-202 will act as a DHCP Server.
Windows 98/ME
Right click the Network Neighbourhood icon on the desktop and click
Properties. The following window will be displayed:
Windows 2000/XP
Right click the My Network Places icon on the desktop and click Prop-
erties. The following window will be displayed:
Right click the Local Area Connection of the correct network card, and
then choose Properties.