Operation Manual

25
10 Advanced Settings
10.1 Static Routing
Static Routing allows you to configure the routing table of this router.
Parameters Description
Type Select NET or HOST. Set HOST if the
destination address is a single HOST.
If the destination address is a subnet, set
NET.
Destination LAN IP The network IP address of the destination
LAN.
Subnet Mask The IP subnet mask of the destination LAN.
Gateway The IP address of the neighbor gateway in
the path toward the destination LAN.
Click <Apply> at the bottom of the screen to save the above configurations. You
can now configure other advance sections or start using the router (with the advance
settings in place)