Operation Manual

5.6 Configuration

5.6.1 WAN Configuration

This screen contains settings for the WAN interface. (In most cases you won’t have to

configure manually. The configuration Utility from Chapter 4 takes care of all these settings)

System Wide Settings

Default Gateway: Enter the gateway address provided by your ISP.

Per VC Settings

There are eight Virtual Circuits (VC) to set, VC 0 to VC 7. Before you make the settings,

please scroll down to the bottom of the page and select the item of Virtual Circuit you

want to configure. Then, press the Submit button.

Enabled? : Select Yes if you want to enable the settings of this VC or select No if you want

to disable the settings of this VC.

VPI: Consult the ISP to get the Virtual Path Identifier (VPI) number. The default value is 0.

VCI: Consult the ISP to get the Virtual Channel Identifier (VCI) number. The default value

is 32.

Static IP Address: Enter the information provided by your ISP.

Subnet Mask: Enter the information provided by your ISP.