Operation Manual

DC-214/216 ADSL Homestation
52 Please, visit www.sitecom.com for productregistration
System Default Gateway Configuration
The system-wide Default Gateway now provides three options: Auto, User-selected
Network Interface, and None.
None: This field allows the user to choose to have no Default Gateway in the CPE
Auto: This field allows the user to select the CPE to automatically decide the Default
Gateway. (System Default)
User-selected Network Interface: This field allows user to select a Network Interface
from a list (PVCs, PPP Sessions, USB and LAN). This option lets the user to associate
the system-wide Default Gateway to a Network Interface, static or dynamic, and provides
a way to fix the Default Gateway to a dynamic Network Interface before the interface is
established.
Route Configuration
Destination: This field allows the user to enter the remote network or host IP address for
the static routing.
Netmask: This field allows the user to enter the Subnet Mask for the static routing.
Gateway: This field allows the user to enter the IP address of the gateway device that
allows the router to contact the remote network or the host for Specified IP or select an
Interface for the Gateway.
Manually Configured Routes: This field displays the static route entries entered by the
user