USB Internet Phone IT-001 Full Manual
Table of Contents 1. Introduction ........................................................................................................... 1 Package Contents .......................................................................................................................................... 1 System Requirements ................................................................................................................................. 1 Features..................................................
Redialing ....................................................................................................... Fout! Bladwijzer niet gedefinieerd. Holding a Call ............................................................................................. Fout! Bladwijzer niet gedefinieerd. Clearing the Entered Numbers......................................................... Fout! Bladwijzer niet gedefinieerd. Selecting a Ring Tone .........................................................................
Sitecom USB Internet Phone IT-001 1. Introduction This USB phone provides you the convenience of make free calls over the Internet from PC to PC, as easy as using normal telephones. Simply plug the USB phone into the USB port of your PC, download Internet telephony software like Skype, and you can start making calls. You can easily access the net and connect to your friends, family members or colleagues.
Sitecom USB Internet Phone IT-001 Features Compatible with VoIP (Voice over Internet Protocol) solutions such as Skype Works as microphone & earphone with Yahoo Messenger, MSN Messenger, MS NetMeeting and etc.
Sitecom USB Internet Phone IT-001 Keypads and Control Buttons Icon HOLD Function Description Ring Tone Plays and selects built-in ring tones. Skype on/Tab Switch Opens Skype window and switches between tabs. Hold Places a call on hold. Pressing it again resumes the call. Dial/Answer/Redial Dials, answers or redials a call. 0~9, +, #, Hang up/ Reject/Clear Ends or rejects a call. Clears entered number. Stops playing a ring tone after pressing Returns to LCD main screen.
Sitecom USB Internet Phone IT-001 2. Hardware Installation Connect one end of the provided USB cable to the USB phone and the other end to your computer’s USB port. When connected to your computer, Windows will automatically detect the new device. Complete the driver installation according to your Windows operation system. For Windows XP/2000 Under Windows XP/2000, you don’t need to install the driver. The system will automatically install Windows built-in audio driver.
Sitecom USB Internet Phone IT-001 4. Select The updated driver (Recommended) and click Next. 5. Follow the on-screen prompts to proceed. As the system will detect three device components, you need to repeat the above steps three times. During the installation, Windows may prompt you for the Windows 98SE CD-ROM. In this case, insert the Windows 98SE Setup disc and click OK. In Windows 98 and ME, the LCD always displays Connecting…as shown below when the USB phone is connected.
Sitecom USB Internet Phone IT-001 3. Application Installation If you are using the USB phone simply as an audio input/output device in combination with an instant communication software, e.g., NetMeeting, MSN Messenger or Yahoo Messenger), you don’t need to install any other software. Please ignore this chapter. To use Skype with the USB phone in Windows 2000/XP, please follow the instructions in this chapter to complete the installation. Installing Skype Software 1.
Sitecom USB Internet Phone IT-001 2. When the welcome screen appears, click Next. 3. Select to install the program in default directory or click Change to specify another directory. Then click Next. 4. Click Install to begin the installation.
Sitecom USB Internet Phone IT-001 5. Click Finish to complete the installation. 6. If Skype is launched, the following screen will appear, select Allow this program to use Skype and click OK. 7. After the installation, the utility starts automatically with its icon located in the system tray. It also starts automatically at system startup. Verifying Skype Audio Device When the USB phone is plugged in, it should be automatically set as Skype’s default audio devices.
Sitecom USB Internet Phone IT-001 4. Using utility Control Panel The utility comes with a control panel allowing users to adjust USB phone settings as required. This chapter describes the functions available through the API control panel. Since the default settings satisfy most users’ needs, you can just proceed to next chapter to start using the USB phone. After the installation, the utility starts automatically with its icon located in the system tray. It also starts automatically at system startup.
Sitecom USB Internet Phone IT-001 Disabled: Skype will use Windows default audio device unless you manually specify your USB phone via Tools > Options > Sound Devices. Autorun Skype When Plugging USB Phone When enabled, if you are not logging in to Skype, plugging the USB phone will launch Skype and automatically log you in. Volume Control This item allows you to adjust the USB phone’s speaker and microphone volume.
Sitecom USB Internet Phone IT-001 View Version Information To view the version information, right-click the systray icon and choose About. Exit Utility To exit the utility, right-click the utility system tray icon and choose Exit.
Sitecom USB Internet Phone IT-001 5. Specification Interface USB 1.1 compliant Mini B type female connector Response Frequency 100 Hz~15K Hz Signal-To-Noise Ratio 90 dB Receiver Output Impedance 50mW / 32 Ohm Operating Voltage DC 5V (Bus-Powered) LCD Resolution: 128x64 pixels Size: 32 x 19.
Sitecom USB Internet Phone IT-001 6. Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation.