WLX-2003
Introduction Thank you for purchasing the Sitecom WLX-2003 Wall Mount Range Extender N300. With this product you can easily double the signal coverage of your Wi-Fi network for better Wi-Fi quality in homes with many rooms or multiple floors. With both a Wi-Fi extender and a power adapter in a compact design, the WLX-2003 can be plugged directly into an electrical outlet for convenient placement. The smart signal strength LED makes it easy for you to set it up where your Wi-Fi signal needs enhancement.
Table of Contents 1 KEY FEATURES ........................................................................................ 6 2 PACKAGE CONTENTS ............................................................................... 7 3 CAUTIONS .............................................................................................. 8 4 PRODUCT LAYOUT ................................................................................... 9 5 NETWORK + SYSTEM REQUIREMENTS ...........................................
1 KEY FEATURES Features Advantages Incredible Data Rate up to 300Mbps* Heavy data payloads such as MPEG video streaming IEEE 802.11n Compliant and backwards compatible with 802.11b/g Fully Interoperable with IEEE 802.11b / IEEE802.11g compliant devices with legacy protection Support 802.1x authenticator, 802.
2 PACKAGE CONTENTS Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the unit must be shipped back in its original package. 1. 2. 3. 4. 5.
3 CAUTIONS This device’s design and manufacturer has your safety in mind. In order to safely and effectively use this device, please read the following before usage. 3.1 Usage Cautions The user should not modify this device. The environmental temperature should be within +5 ~ +35 degrees Celsius. 3.2 Power The device’s power voltage is AC 230v. When plugging in the device, make sure it cannot get damaged or be subject to pressure.
4 PRODUCT LAYOUT Description Network Port You can use this port to connect a wired device so it benefits from the repeated signal. OPS Button You can use this button to connect using OPS. OPS Button functions: Press 0-5 seconds: WPS registrar Press 5-10 seconds: WPS enrollee Press 15+ seconds: reset to factory defaults.
LED Description From top to bottom: LED Color Description Signal Orange This LED shows the quality of the signal it receives from your Router/Access Point. 0-25%: 250 milliseconds ON – 250 millisecond OFF 25-50%: 1000 milliseconds ON – 1000 milliseconds OFF 50-100%: Continuous ON WLAN Blue Lights up in Blue when WLAN is enabled. Blinks on traffic. Power Orange Lights up when powered ON. Blinks on TEST/RESET. OPS White Blinks when OPS mode is on.
5 NETWORK + SYSTEM REQUIREMENTS To begin using the WLX-2003, make sure you meet the following as minimum requirements: • • • • • • PC/Notebook. 1 Free Ethernet port. WiFi card/USB dongle (802.11 b/g/n) – optional. PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera) Ethernet compatible CAT5 cables. Router or Access Point 6 WLX-2003 PLACEMENT You can place the WLX-2003 directly in a wall socket.
7 PC NETWORK ADAPTER SETUP Windows XP • Enter [Start Menu] -> select [Control panel] -> select [Network]. • Select [Local Area Connection]) icon -> select [properties] • Select [Internet Protocol (TCP/IP)] =>Click [Properties].
• Select the [General] tab. The device supports the [DHCP] function, please select both [Obtain an IP address automatically] and [Obtain DNS server address automatically]. Windows Vista/Seven • Enter [Start Menu] -> select [Control panel] -> select [View network status and tasks] -> select [Manage network connections].
• Select [Local Area Connection]) icon -> select [properties] • Select [Internet Protocol Version 4 (TCP/IPv4)] -> Click [Properties].
• Select the [General] tab. The device supports the [DHCP] function, please select both [Obtain an IP address automatically] and [Obtain DNS server address automatically].
8 BRINGING UP THE WLX-2003 You can plug the WLX-2003 directly into a wall outlet. Switch the device on with the power switch located on the bottom of the device. The WLX-2003 automatically enters the self-test phase. During self-test phase, the Power LED will be lit continuously to indicate that this product is in normal operation.
9 INITIAL SETUP WLX-2003 LOGIN procedure 1. OPEN your browser (e.g. Internet Explorer). 2. Type http://192.168.128.253 in the address bar and press [Enter] 3. Type user name and password (default is admin/admin). 4. Click OK.
5. You will see the home page of the WLX-2003. The System status section allows you to monitor the current status of your device, the UP time, hardware information, serial number as well as firmware version information is displayed here.
10 CONFIGURATION WIZARD With the wizard you can configure the Range Extender to connect to your existing network. Click Wizard to start configuring the WLX-2003. The Setup wizard will now be displayed. On the first page you can select the network that the Range Extender needs to connect to. You can also see the signal strength, the channel and the encryption type used on the networks surrounding the Range Extender. Select your network from the list. Click Next.
On this last page you will see the new settings of your Range Extender. You can use these settings on your computer to connect to the Range Extender. You can use the “Copy to Clipboard” button to copy the wireless password to your clipboard so you don’t have to type it in.
11 BASIC SETTINGS Band Please select the wireless band you wish to use. By selecting a different band setting, you’ll be able to allow or deny the wireless clients on a certain band. MAIN ESSID Please input the ESSID (the name used to identify this wireless access point) here. You can input up to 32 alphanumerical characters. PLEASE NOTE THAT THE ESSID IS CASE SENSITIVE. Channel Number Please select a channel number you wish to use.
Site Survey Click ‘Site Survey’ button, then a “Wireless Site Survey Table” will pop up. It will list all available access points nearby. You can select one access point in the table and the access point will join wireless LAN through this access point.
12 ADVANCED SETTINGS Security This device provides many types of wireless security (wireless data encryption). When you use data encryption, data transferred by radio signals in the air will become unreadable for those people who don’t know the correct encryption key (encryption password). There are four types of security level you can select: Disable (no security - data encryption disabled), WEP, WPA Pre-shared Key, and WPA Radius. Please refer to the following sections for detailed instructions.
Key Length You can select the WEP key length for encryption, 64-bit or 128-bit. The larger the key will be the higher level of security is used, but the throughput will be lower. Key Format You may select ASCII Characters (alphanumeric format) or Hexadecimal Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. Key1 - Key4The WEP keys are used to encrypt data transmitted in the wireless network. Use the following rules to setup a WEP key on the device.
WPA WPA Unicast Cipher Suite Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client supports the cipher you selected. Pre-shared Key Format Please select the format of pre-shared key here, available options are ‘Passphrase’ (8 to 63 alphanumerical characters) and ‘Hex (64 hexadecimal characters – 0 to 9 and a to f). Pre-shared Key Please input pre-shared key according to the key format you selected here.
Advanced This tab allows you to set the advanced wireless options. The options included are Channel Bandwidth, Fragment Threshold, RTS Threshold, Beacon Interval, and Preamble Type. You should not change these parameters unless you know what effect the changes will have on the router. Fragment Threshold Set the Fragment threshold of wireless radio. The default value is 2346. RTS Threshold Set the RTS threshold of wireless radio. The default value is 2347.
Preamble Type Set the type of preamble of wireless radio. The default setting is ‘Short Preamble’. Broadcast ESSID Decide if the wireless access point will broadcast its own ESSID or not. You can hide the ESSID of your wireless access point (set the option to ‘Disable’), so only people who know the ESSID of your wireless access point can get connected.
WPS Wi-Fi Protected Setup (WPS) is the simplest way to establish a connection between the wireless clients and the wireless router. You don’t have to select the encryption mode and fill in a long encryption passphrase every time when you try to setup a wireless connection. You only need to press a button on both wireless client and wireless router, and WPS will do the rest for you.
Authentication Mode It shows the active authentication mode for the wireless connection. Passphrase Key It shows the passphrase key that is randomly generated by the wireless router during the WPS process. You may need this information when using a device which doesn’t support WPS. Mode In Client mode the device is set to connect to your existing network. In Registrar mode the device is set to connect to your clients. WPS via Push Button Press the button to start the WPS process.
13 TOOLBOX SETTINGS System This device provides some control functions including password, IP address management, and DHCP server function. Please go to Toolbox, and open the ‘System’ tab, to access these functions. Below are detailed descriptions of every control function. Password Settings You can change the password used to enter the web configuration menu of this device.
network this device connects to, please select ‘Disable’. After you finish, please go to the bottom of this page and click ‘Apply’. DHCP Server This device is capable to act as a DHCP server for your network. Default Gateway Please input the IP address of default gateway of your network here. DNS Address Please input the IP address of domain name server (DNS) here. DHCP Client Start Address Please input the start IP address of the IP range.
Backup You can back up all configurations of this device to a file, so you can make several copies of access point configuration for security reasons. Backup Settings Press ‘Save...’ button, and you’ll be prompted to download the configuration as a file. The default filename is ‘config.bin’. You can save it as another filename for different versions, and keep it in a safe place.
Upgrade If there is a new firmware available, you can upload the firmware to the device to get extra functions or problem fixes. Click the ‘Browse’ button. You’ll be prompted to provide the filename of the firmware upgrade file. Please download the latest firmware file from our website, and use it to upgrade your device. After a firmware file is selected, click the ‘Apply’ button, and the device will start the firmware upgrade procedure automatically.
Reset When you think the device is not working properly, you can use this function to restart the device; this may help and solve the problem. This function is useful when the device is far from you or unreachable. However, if the device is not responding, you may have to switch it off by unplugging the power plug and plugging it back again after 10 seconds.
Parts of the firmware of the WLX-2002 WLX-2003 Wireless dualband Broadband router are subject to the GNU general public license. Appendix A: Licensing Information This product includes third-party software licensed under the terms of the GNU General Public License.. You can modify or redistribute this free software under the terms of the GNU General Public License. Please see Appendix B for the exact terms and conditions of this license.
using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price.
who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9.
