Operation Manual

5
Using the Cordless Presenter
1. Laser Pointer. Press to activate.
2. Previous slide. Press to activate.
3. Next slide. Press to activate.
Troubleshooting
In some instances, radio frequency interference may require you to switch to an
alternate channel. To do this:
1. Press and release the button at the end of the receiver.
2. Within ten seconds, press and release the connection button on the back of
the presenter.
Revision 1.0
© Sitecom Europe BV 2011
Note: All the information contained in this manual was correct at the time of
publication.
However, as our engineers are always updating and improving the product, your
device may have a slightly different appearance or modified functionality than
presented in this manual.