Operation Manual

22
Chapter 3: Wireless Settings
3.1 Wireless Basic Settings
Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE 802.11b or
801.11g wireless network adaptor connect to your Intranet. It supports WEP and WPA2
encryption to enhance the security of your wireless network.
Parameters Default Description
Disable wireless interface Disabled You can select to enable or disable the wireless
access point module of this router.
Mode It allows you to set the AP to AP, Station, Bridge
or WDS mode.
Band It allows you to set the AP fix at 802.11b or
802.11g mode. You also can select B+G mode
to allow the AP select 802.11b and 802.11g
connection automatically.
ESSID Sitecom This is the name of the wireless LAN. All the
devices in the same wireless LAN should have
the same ESSID.
Channel Number 11 The channel used by the wireless LAN. All
devices in the same wireless LAN should use
the same channel.