Operation Manual

8 Bring up WL-346

Connect the supplied power-adapter to the power inlet port and connect it to

a wall outlet. TheWL-346 automatically enters the self-test phase. During self-

test phase, the Power LED will blink briefly, and then will be lit continuously to

indicate that this product is in normal operation.

9 Initial Setup WL-346

1. Click OPEN your browser (e.g. Internet Explorer).

2. Type http://192.168.0.1 in the address bar and press [Enter]

3. Type user name and password (default is admin/admin).

4. Click OK.

5. You will see the home page of the WL-346.