Operation Manual

Type This is the protocol type to be forwarded. You can choose to forward
“TCP” or “UDP” packets only, or select “both” to forward both “TCP” and “UDP”
packets.
Port Range The range of ports to be forward to the private IP.
Comment description of this setting.
Add Port Forwarding Fill in the "Private IP", “Type”, “Port Range” and
"Comment" of the setting to be added and then click "Add". Then this Port
Forwarding setting will be added into the "Current Port Forwarding Table"
below.
Remove Port Forwarding If you want to remove a Port Forwarding setting
from the "Current Port Forwarding Table", select the Port Forwarding setting
that you want to remove in the table and then click "Delete Selected". If you
want to remove all Port Forwarding settings from the table, just click "Delete
All" button. Click "Reset" will clear your current selections.