Operation Manual

8 Bring up the WLM-2501

Connect the supplied power-adapter to the power inlet port and connect it to

a wall outlet. Press the Power-Button to turn the modem on.

The WLM-2501 automatically enters the self-test phase. During self-test

phase, the Power LED will blink briefly, and then will be lit continuously to

indicate that this product is in normal operation.

9 Initial Setup WLM-2501

1. OPEN your browser (e.g. Internet Explorer).

2. Type http://192.168.0.1 in address bar and press [Enter]

Type user name and password (The default username is “admin”, the

password can be found on the back label of the device).

3. Click OK.

4. You will see the home page of the WLM-2501.