Operation Manual

9 Bring up the WLM-3550
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Press the Power-Button to turn the modem on.
The WLM-3550 automatically enters the self-test phase. During self-test
phase, the Power LED will blink briefly, and then will be lit continuously to
indicate that this product is in normal operation.
10 Initial Setup WLM-3550
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
4 Type http://192.168.0.1 in address bar and press [Enter]
Type user name and password (The default username is “admin”, the
password can be found on the back label of the device).
5 Click OK.
6 You will see the home page of the WLM-3550.