Operation Manual

SNMP
Simple Network Management Protocol (SNMP) is a troubleshooting and
management protocol that uses the UDP protocol on port 161 to communicate
between clients and servers. The router can be managed locally or remotely by
SNMP protocol.
Parameter Description
SNMP
Select “Disable” or “Enable” to disable or enable the
SNMP feature.
Get Community Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
Set Community Name of the write-only community. This write-only
community allows write operation to the objects
defines as read-writable in the MIB.
When you finish, click ‘Save’ to save the settings made and restart the router
so the settings will take effect after it reboots.