User manual

N Data Rate The “Data Rate” is the rate that this access point uses to transmit
data packets for N compliant wireless nodes. Highest to lowest data rate can be
fixed.
Channel Bandwidth is the range of frequencies that will be used.
Preamble Type The “Long Preamble” can provide better wireless LAN
compatibility while the “Short Preamble” can provide better wireless LAN
performance.
CTS Protection: It is recommended to enable the protection mechanism. This
mechanism can decrease the rate of data collision between 802.11b and 802.11g
wireless stations. When the protection mode is enabled, the throughput of the AP
will be a little lower due to a lot of frame-network that is transmitted.
TX Power can be set to a bare minimum or maximum power.