Operation Manual

101
L2TP
In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling
protocol used to support virtual private networks (VPNs). It does not provide
any encryption or confidentiality by itself; it relies on an encryption protocol that
it passes within the tunnel to provide privacy.
General
This page allows you to configure the general VPN settings.
Name Enter a name for your VPN policy
Connection Type Supports IPSec and L2TP over IPSec methods to
establish VPN connection.
L2TP
Authentication Select the desired authentication protocol (PAP,
CHAP, Auto). Select Auto by default.
User Name Enter the username for authentication.
Password Enter the password for authentication.
Network
Server IP Enter the VPN Server IP address.
Remote IP Range Assign a range of IP addresses. The assigned IP
range should be on the same IP network but not
the in the same range as your DHCP IP range.