Operation Manual

110
5. Complete the following fields :
Security Gateway Type Choose the type of Security Gateway you
wish to use(In this example we use IP
address.
Security Gateway Enter the WAN IP address of the remote
VPN Server( In our example this is the WAN
IP address of the WLR-4002B in Location A,
77.193.12.20)
Remote Address Enter an IP address that is on the same
Subnet as the Local LAN of the remote VPN
server (In our example the WLR-4002B in
location A has a local IP of 192.168.2.1 so
we set the Remote address to 192.168.2.0)
Remote Netmask Enter the Netmask of the Remote Local LAN(In
our example the WLR-4002B in Location A has
a IP Subnet Mask of 255.255.255.0)
click NEXT to continue.
6. Enter the Shared Key you wish to use, this shared key must be used in
both VPN servers.(In this example we used ‘test’)