Operation Manual

DHCP Client Status
This page shows all DHCP clients (LAN PCs) currently connected to your network. The
table shows the assigned IP address, MAC address and expiration time for each DHCP
leased client. Use the Refresh button to update the available information.
You can check “Enable Static DHCP IP”. It is possible to add more static DHCP IPs. They
are listed in the table Current Static DHCP Table. IP can be deleted at will from the table.
Click Apply to save the changed configuration.
WLR-5100 Log
View the operation log of the router. This page shows the current system log of the
router. It displays any event that occurred during or after system start up. At the bottom
of the page, the system log can be saved <Save> to a local file for further processing or
the system log can be cleared <Clear> or it can be refreshed <Refresh> to get the most
updated information. When the system is powered down, the system log will disappear if
not saved to a local file.