User manual

The wireless router supports two types of WPS: WPS via Push Button and WPS via PIN
code. If you want to use the Push Button, you have to push a specific button on the
wireless client or in the utility of the wireless client to start the WPS mode, and switch
the wireless router to WPS mode. You can simply push the WPS button of the wireless
router, or click the „Start to Process‟ button in the web configuration interface. If you
want to use the PIN code, you have to know the PIN code of the wireless client and
switch it to WPS mode, then fill-in the PIN code of the wireless client through the web
configuration interface of the wireless router.
• WPS: Check the box to enable WPS function and uncheck it to disable the
WPS function.
• WPS Current Status: If the wireless security (encryption) function of this
wireless router is properly set, you‟ll see a „Configured‟ message here.
Otherwise, you‟ll see „UnConfigured‟.
• Self-Pin Code: This is the WPS PIN code of the wireless router. You may need
this information when connecting to other WPS-enabled wireless devices.
• SSID: This is the network broadcast name (SSID) of the router.
• Authentication Mode: It shows the active authentication mode for the
wireless connection.
• Passphrase Key: It shows the passphrase key that is randomly generated by
the wireless router during the WPS process. You may need this information
when using a device which doesn‟t support WPS.
• WPS via Push Button: Press the button to start the WPS process. The router
will wait for the WPS request from the wireless devices within 2 minutes.
• WPS via PIN: You can fill-in the PIN code of the wireless device and press the
button to start the WPS process. The router will wait for the WPS request from
the wireless device within 2 minutes.